Currently Viewing Product 2 of 4

  • (image for) Bird Nesting Box - Open Fronted

Bird Nesting Box - Open Fronted

£15.00
Ask a question about this item
QTY :

With drainage holes in base.

Don’t worry if birds don't move in right away – it may take a while for a family to take residence. But you'll be ready when they do! Hopefully, before long, you’ll notice some activity – such as males chirping nearby, or even from the roof of the box.

This style of box is suitable for those birds who prefer an open fronted box (eg. blackbirds and robins). For birds that prefer an enclosed space - please go to https://rickswoodstuff.uk/birdhouses-and-tables/birdhouse-1

When ordering, please choose the types of bird you hope to attract and I'll supply you with the appropriately sized front wall.

Choosing the location

Things to consider when choosing where to position your nestbox include:

  • Boxes for tits, sparrows or starlings should be fixed two to four metres up a tree or a wall.
  • Unless there are trees or buildings which shade the box during the day, face the box between north and east, thus avoiding strong sunlight and the wettest winds. 
  • Make sure that the birds have a clear flight path to the nest without any clutter directly in front of the entrance. Tilt the box forward slightly so that any driving rain will hit the roof and bounce clear. 
  • House sparrows and starlings will readily use nestboxes placed high up under the eaves. Since these birds nest in loose colonies, two or three can be sited spaced out on the same side of the house. Keep these away from areas where house martins normally nest. 
  • Two boxes close together may be occupied by the same species if they are at the edge of adjoining territories and there is plenty of natural food. While this readily happens in the countryside, it is rare in gardens, where you normally can only expect one nesting pair of any one species. The exceptions to this are house and tree sparrows and house martins, which are colonial nesters. By putting up different boxes, several species can be attracted.

Attaching your nestbox

Before you put up your nestbox, remember to keep in mind the following:

  • Fixing your nestbox with nails may damage the tree. It is better to attach it either with a nylon bolt or with wire around the trunk or branch. Use a piece of hose or section of car tyre around the wire to prevent damage to the tree. Remember that trees grow in girth as well as height, and check the fixing every two or three years.
  • Open-fronted boxes for robins and wrens need to be low down, below 2m, well hidden in vegetation. Those for spotted flycatchers need to be 2-4m high, sheltered by vegetation but with a clear outlook. Woodpecker boxes need to be 3-5m high on a tree trunk with a clear flight path and away from disturbance. 
  • Nestboxes are best put up during the autumn. Many birds will enter nestboxes during the autumn and winter, looking for a suitable place to roost or perhaps to feed. They often use the same boxes for nesting the following spring. Tits will not seriously investigate nesting sites until February or March.

 

Putting it together

Drill drainage holes to the base of the box, and use galvanised nails or screws to assemble. It's always best to leave the box untreated. As it weathers, it will blend into its surroundings. 

Softwood boxes can be treated with selected water-based preservatives, which are known to be safe for animals, such as Sadolin. Apply it only to the outside of the box, and not around the entrance hole. Make sure the box dries and airs thoroughly before you put it up. 

A woodpecker box should be filled with a block of balsa wood, rotting log or wood chips – woodpeckers like to excavate their own nesting cavities.

Please note that if the box is going to be placed in a location where it will be exposed to heavy rain, it would be useful to cover the top of the lid with recycled leather or rubber. This will provide further waterproofing and extend the service life of the box.

How big does the hole need to be?

The entrance hole size depends on the species you hope to attract: 

  • 25 mm for blue, coal and marsh tits
  • 28 mm for great tits, tree sparrows and pied flycatchers
  • 32 mm for house sparrows and nuthatches
  • 45 mm for starlings.

The small box with 100 mm high open front may attract robins or pied wagtails. A wren would need a 140 mm high front panel, while spotted flycatchers prefer a low 60 mm front to the box.